Safety Information - YASKAWA VIPA System MICRO M13-CCF0000 Manual

VIPA System MICRO

1.3 Safety information

Applications conforming
with specifications
Documentation
Disposal
HB400 | CPU | M13-CCF0000 | en | 16-47
Supplementary information and useful tips.
The system is constructed and produced for:
n communication and process control
general control and automation tasks
n
n industrial applications
n operation within the environmental conditions specified in the technical data
n installation into a cubicle
DANGER!
This device is not certified for applications in
– in explosive environments (EX-zone)
The manual must be available to all personnel in the
n project design department
n installation department
n commissioning
n operation
CAUTION!
The following conditions must be met before using or commis-
sioning the components described in this manual:
– Hardware modifications to the process control system should only be
carried out when the system has been disconnected from power!
– Installation and hardware modifications only by properly trained per-
sonnel.
– The national rules and regulations of the respective country must be
satisfied (installation, safety, EMC ...)
National rules and regulations apply to the disposal of the unit!
General
Safety information
9