Advertisement
Safety Information
Read this instruction manual and the related documents thoroughly before installation, operation, maintenance
or inspection of this product. Make sure you understand product information,all precautions and safety
information before using the product.
referred to whenever necessary.
The following conventions are used to indicate precautions in this manual.
Indicates precautions that, if not heeded, could possibly result in loss
WARNING
of life or serious injury.
Indicates precautions that, if not heeded, could result in relatively
CAUTION
serious or minor injury, damage to the product, or faulty operation.
Even items described in
In either case, follow these important notes.
NOTE
: Items to be observed by users are described in the relevant sections.
・ A CMOS IC is used for the Option Card. Handle the control board and CMOS IC
carefully. The CMOS IC can be destroyed by static electricity if touched directly.
・ To remove this option card from the inverter and transport or store it separately,
keep the option card in the anti-static electricity package used to protect the unit at
delivery.
・ Do not change the wiring or remove/insert the connectors while the power is turned
ON.
Failure to observe this caution may result in injury.
The PROFIBUS-DP Communication Interface Card SI-P1 is an option card that can be mounted on the
inverter control circuit board and used for communications with the PROFIBUS-DP master.
Three types of I/O data length (32 bytes, 12bytes, 6bytes) can be selected. The run/stop status can be
monitored and the inverter internal constants can be set/changed from the PROFIBUS-DP master.
Tel : 03.26.04.20.21 - Fax : 03.26.04.28.20 - Web : http: www.audin.fr - Email : info@audin.fr
Also, keep this manual in a convenient location so that it can be
CAUTION
CAUTION
- -
2
AUDIN - 7 bis rue de Tinqueux - 51100 Reims - France
may result in a vital acccident in some situations.
Advertisement
