F10 Mode Options; Selecting F10 Mode To Use - HPE ProLiant User Manual

3. Verify that your system meets the requirements for using the remote console application you want to use.
4. Click the launch button for your selected application.
.Net Console
HTML5 Console
Alternatively, you can click an Integrated Remote Console link on the Information - iLO Overview
5. Restart or power on the server.
The server restarts and the POST screen appears.
6. Press F10 when prompted during the server POST.
7. Select Intelligent Provisioning.
Results Results
When accessing Intelligent Provisioning, one of the following happens:
If you are using Intelligent Provisioning for the first time, the First Time Setup wizard will guide you through initial configuration and
registration tasks. For more information, see Using the First Time Setup wizard .
To exit Intelligent Provisioning, reboot the server by clicking the power icon at the top right of the page.

F10 mode options

F10 mode options
When you launch F10 mode from the POST screen, you are able to use Intelligent Provisioning.
Intelligent Provisioning offer tools to provision and maintain servers.
Intelligent Provisioning Intelligent Provisioning
Provisioning multiple servers.
Configuring multiple RAID arrays.
Users who have servers provisioned and deployed.
Subtopics Subtopics

Selecting F10 mode to use

Selecting F10 mode to use
Initial configuration in Intelligent Provisioning Initial configuration in Intelligent Provisioning
Selecting F10 mode to use Selecting F10 mode to use
About this task About this task
Procedure Procedure
1. Boot the server.
2. On the POST screen, press
F10
.
3. Enter Intelligent Provisioning, if Host Authentication is disabled in iLO. If Host Authentication is enabled, pass the credentials to use
Intelligent Provisioning.
Information - iLO Overview page.
Intelligent Provisioning 4.20 User Guide for HPE ProLiant and Synergy Gen11 Servers 9