Seat Removal And Installation; Street Scrambler Seat Removal - Triumph Street Cup Owner's Handbook Manual

Seat Removal and Installation

Warning
To prevent detachment of a seat
during riding, after installation always
grasp the seat and pull firmly upwards.
If the seat is not correctly secured it
will detach from the lock.
A loose or detached seat could cause
loss of motorcycle control and an
accident.
Street Twin, Street Cup, Thruxton,
Thruxton R, Bonneville T100 and
Bonneville T120
Seat Removal
To remove the seat:
1
1. Seat lock
Insert the ignition key into the seat lock
and turn it counterclockwise.
This will release the seat from its lock.
Slide the seat upwards and rearwards for
complete removal from the motorcycle.
General Information
Street Twin, Street Cup, Thruxton,
Thruxton R, Bonneville T100 and
Bonneville T120
Seat Installation
To re-install the seat:
Engage the seat's tongue underneath
the bracket near the fuel tank.
Line up the hinges and press down at
the rear to engage the seat lock.
Note:
• An audible click can be heard when
the seat is fully engaged into its lock.

Street Scrambler Seat Removal

Note:
• If a passenger seat is equipped, it
must be removed before removing
the rider's seat.
• If a luggage rack is equipped, the
rider's seat can be removed without
removing the luggage rack.
Passenger Seat Removal
To remove the passenger seat:
1
cjyn
1. Passenger seat
2. Fastener
2
63