Ldap-Server Port - Cisco Nexus 7000 Series Command Reference Manual

ldap-server port

ldap-server port
To configure a global Lightweight Directory Access Protocol (LDAP) server port through which clients initiate
TCP connections, use the ldap-server port command. To remove the LDAP server port configuration, use
the no form of this command.
ldap-server port tcp-port
no ldap-server port tcp-port
Syntax Description
tcp-port
Command Default
TCP port 389
Command Modes
Global configuration
Command History
Release
5.2(1)
5.0(2)
Usage Guidelines
To use this command, you must enable LDAP.
This command does not require a license.
Examples
This example shows how to configure a global TCP port for LDAP messages:
switch# configure terminal
switch(config)# ldap-server port 2
Related Commands
Command
feature ldap
show ldap-server
Cisco Nexus 7000 Series Security Command Reference
484
Global TCP port to use for LDAP messages to the
server. The range is from 1 to 65535.
Modification
This command was deprecated.
This command was introduced.
Description
Enables LDAP.
Displays the LDAP server configuration.
L Commands