Service Dhcp - Cisco Nexus 7000 Series Command Reference Manual

service dhcp

service dhcp
To enable the DHCP relay agent, use the service dhcp command. To disable the DHCP relay agent, use the
no form of this command.
service dhcp
no service dhcp
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Global configuration
Command History
Release
4.2(1)
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to globally enable DHCP snooping:
switch# configure terminal
switch(config)# service dhcp
switch(config)#
Related Commands
Command
feature dhcp
ip dhcp relay address
ip dhcp relay information option
ip dhcp snooping
show ip dhcp snooping
Cisco Nexus 7000 Series Security Command Reference
650
Modification
This command was deprecated and replaced with the ip dhcp relay
command.
This command was introduced.
Description
Enables the DHCP snooping feature on the device.
Configures an IP address of a DHCP server on an
interface.
Enables the insertion and removal of option-82
information from DHCP packets.
Globally enables DHCP snooping on the device.
Displays general information about DHCP snooping.
S Commands