Show Startup-Config Radius - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show startup-config radius

To display RADIUS configuration information in the startup configuration, use the show startup-config
radius command.
show startup-config radius
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the RADIUS information in the startup configuration:
switch# show startup-config radius
version 4.0(1)
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show startup-config radius
907