Cts Role-Based Counters Enable - Cisco Nexus 7000 Series Command Reference Manual

C Commands

cts role-based counters enable

To enable role-based access control list (RBACL) statistics, use the cts role-based counters enable command.
To disabled RBACL statistics, use the no form of this command.
cts role-based counters enable
no cts role-based counters enable
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
5.0(2)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
To use this command, you must enable RBACL policy enforcement on the VLAN and VRF.
When you enable RBACL statistics, each policy requires one entry in the . If you do not have enough space
remaining in the , an error message appears, and you cannot enable the statistics.
When you modify an RBACL policy, statistics for the previously assigned access control entry (ACE) are
displayed, and the newly assigned ACE statistics are initialized to 0.
RBACL statistics are lost only when the Cisco NX-OS device reloads or you deliberately clear the statistics.
This command requires the Advanced Services license.
Examples
This example shows how to enable RBACL statistics:
switch# configure terminal
switch(config)# cts role-based counters enable
This example shows how to disable RBACL statistics:
switch# configure terminal
switch(config)# no cts role-based counters enable
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
cts role-based counters enable
161