Show Ipv6 Nd Raguard Policy - Cisco Nexus 7000 Series Command Reference Manual

show ipv6 nd raguard policy

show ipv6 nd raguard policy
To display a router advertisements (RAs) guard policy on all interfaces configured with the RA guard feature,
use the show ipv6 nd raguard policy command.
show ipv6 nd raguard policy [policy-name]
Syntax Description
policy-name
Command Modes
Any command mode
Command History
Release
8.0(1)
Usage Guidelines
The show ipv6 nd raguard policy command displays the options configured for the policy on all interfaces
configured with the RA guard feature.
Examples The following example shows the policy configuration for a policy named raguard1 and all the interfaces
where the policy is applied:
switch# show ipv6 nd raguard policy interface raguard1
Policy raguard1 configuration:
device-role host
Policy applied on the following interfaces:
Et0/0
Et1/0
The table below describes the significant fields shown in the display.
Table 2: show ipv6 nd raguard policy Field Descriptions
Field
Policy raguard1 configuration:
device-role host
Policy applied on the following interfaces:
Cisco Nexus 7000 Series Security Command Reference
818
Modification
This command was introduced.
vlan all
vlan all
(Optional) RA guard policy name.
Description
Configuration of the specified policy.
The role of the device attached to the port. This device
configuration is that of host.
The specified interface on which the RA guard feature
is configured.
Show Commands