Action - Cisco Nexus 7000 Series Command Reference Manual

A Commands

action

To specify what the device does when a packet matches a permit command in a VLAN access control list
(VACL), use the action command. To remove an action command, use the no form of this command.
action drop [log]
no action drop [log]
action forward
no action forward
action redirect{ethernet slot | port | port-channel channel-number.subinterface-number}
no action redirect{ethernet slot | port | port-channel channel-number.subinterface-number}
Syntax Description
drop
log
forward
redirect
ethernet slot/port
port-channel channel-number.subinterface-number
Command Default
None
Command Modes
VLAN access-map configuration
Command History
Release
4.0(1)
Specifies that the device drops the packet.
(Optional) Specifies that the device logs the packets
it drops because of the drop keyword.
Specifies that the device forwards the packet to its
destination port.
Specifies that the device redirects the packet to an
interface.
Specifies the Ethernet interface that the device
redirects the packet to.
Specifies the port-channel interface that the device
redirects the packet to.
The dot separator is required between the
Note
channel-number and subinterface-number
arguments.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
action
9