Show Ip Arp Inspection Log - Cisco Nexus 7000 Series Command Reference Manual

show ip arp inspection log

show ip arp inspection log
To display the Dynamic ARP Inspection (DAI) log configuration, use the show ip arp inspection log command.
show ip arp inspection log
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display the DAI log configuration:
switch# show ip arp inspection log
Syslog Buffer Size : 32
Syslog Rate
switch#
Related Commands
Command
clear ip arp inspection log
ip arp inspection log-buffer
show ip arp inspection
show ip arp inspection interface
show running-config dhcp
Cisco Nexus 7000 Series Security Command Reference
786
Modification
This command was introduced.
: 5 entries per 1 seconds
Description
Clears the DAI logging buffer.
Configures the DAI logging buffer size.
Displays the DAI configuration status.
Displays the trust state and the ARP packet rate for
a specified interface.
Displays DHCP snooping configuration, including
DAI configuration.
Show Commands