Cts Manual - Cisco Nexus 7000 Series Command Reference Manual

cts manual

cts manual
To enter Cisco TrustSec manual configuration for an interface, use the cts manual command. To remove the
manual configuration, use the no form of this command.
cts manual
no cts manual
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
After using this command, you must enable and disable the interface using the shutdown/no shutdown
command sequence for the configuration to take effect.
This command requires the Advanced Services license.
Examples This example shows how to enter Cisco TrustSec manual configuration mode for an interface:
switch# configure terminal
switch(config)# interface etherent 2/4
switch(config-if)# cts manual
switch(config-if-cts-manual)#
This example shows how to remove the Cisco TrustSec manual configuration from an interface:
switch# configure terminal
switch(config)# interface etherent 2/4
switch(config-if)# no cts manual
switch(config-if)# shutdown
switch(config-if)# no shutdown
Related Commands
Command
feature cts
Cisco Nexus 7000 Series Security Command Reference
154
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
C Commands