Show Policy-Map Type Control-Plane - Cisco Nexus 7000 Series Command Reference Manual

show policy-map type control-plane

show policy-map type control-plane
To display control plane policy map information, use the show policy-map type control-plane command.
show policy-map type control-plane [expand] [name policy-map-name]
Syntax Description
expand
name policy-map-name
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
You can use this command only in the default virtual device context (VDC).
This command does not require a license.
Examples This example shows how to display control plane policy map information:
switch# show policy-map type control-plane
policy-map type control-plane copp-system-policy
Cisco Nexus 7000 Series Security Command Reference
850
class copp-system-class-critical
police cir 2000 kbps bc 1500 bytes pir 3000 kbps be 1500 bytes conform transmit
exceed transmit violate drop
class copp-system-class-important
police cir 1000 kbps bc 1500 bytes pir 1500 kbps be 1500 bytes conform transmit
exceed transmit violate drop
class copp-system-class-normal
police cir 400 kbps bc 1500 bytes pir 600 kbps be 1500 bytes conform transmit
exceed transmit violate drop
class class-default
police cir 200 kbps bc 1500 bytes pir 300 kbps be 1500 bytes conform transmit
exceed transmit violate drop
(Optional) Displays expanded control plane policy
map information.
(Optional) Specifies the name of the control plane
policy map. The name is case sensitive.
Modification
This command was introduced.
Show Commands