cts sxp speaker hold-time
Examples
The following example shows how to configure the minimum hold time period of a speaker device for 300
seconds:
switch(config)# cts sxp speaker hold-time 300
Related Commands
Command
cts sxp enable
cts sxp listener hold-time
show cts sxp
Cisco Nexus 7000 Series Security Command Reference
190
Description
Enables Cisco TrustSec SXP on a device.
Configures the hold time of a listener device in an
SXPv4 network.
Displays the status of all Cisco TrustSec SXP
configurations.
C Commands