Cts Refresh Environment-Data - Cisco Nexus 7000 Series Command Reference Manual

cts refresh environment-data

cts refresh environment-data
To refresh the Cisco TrustSec environment data downloaded from the AAA server, use the cts refresh
environment-data command.
cts refresh environment-data
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any configuration mode
Command History
Release
6.2(2)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
Ensure that you are using the Cisco Identity Services Engine (ISE) Release 1.0 or later releases.
Examples This example shows how to refresh the Cisco TrustSec environment data downloaded from the AAA server:
switch# cts refresh environment-data
Related Commands
Command
feature cts
show cts environment-data
Cisco Nexus 7000 Series Security Command Reference
156
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Displays the Cisco TrustSec environment data.
C Commands