Show Startup-Config Tacacs - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show startup-config tacacs+

To display TACACS+ configuration information in the startup configuration, use the show startup-config
tacacs+ command.
show startup-config tacacs+
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the TACACS+ information in the startup configuration:
switch# show startup-config tacacs+
version 4.0(1)
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show startup-config tacacs+
909