Configuring The Global Ldap Server Port - Cisco MDS 9000 Series Configuration Manual

Configuring Security Features on an External AAA Server
Note
Step 3
switch(config)# exit
switch#
Exits configuration mode.
Step 4 switch# show ldap-server
(Optional) Displays the LDAP server configuration.
Step 5
switch# copy running-config startup-config
(Optional) Copies the running configuration to the startup configuration.

Configuring the Global LDAP Server Port

You can configure a global LDAP server port through which clients initiate TCP connections. By default,
Cisco NX-OS devices use port 389 for all LDAP requests.
To configure the global LDAP server port, follow these steps:
Procedure
Step 1 switch# configure terminal
switch(config)#
Enters global configuration mode.
Step 2
switch(config)# ldap-server port 2
Specifies the global TCP port to use for LDAP messages to the server. The default TCP port is 389. The range
is from 1 to 65535.
Step 3 switch(config)# exit
switch#
Exits configuration mode.
Step 4
switch# show ldap-server
(Optional) Displays the LDAP server configuration.
Step 5 switch# copy running-config startup-config
(Optional) Copies the running configuration to the startup configuration.
The timeout interval value specified for an LDAP server overrides the global timeout interval value
specified for all LDAP servers.
Cisco MDS 9000 Series Security Configuration Guide, Release 8.x
Configuring the Global LDAP Server Port
49