Show Running-Config Aclmgr - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show running-config aclmgr

To display the user-configured access control lists (ACLs) in the running configuration, use the show
running-config aclmgr command.
show running-config aclmgr [all| inactive-if-config]
Syntax Description
all
inactive-if-config
Command Default
None
Command Modes
Any
Command History
Release
5.2(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to display user-configured ACLs in the running configuration:
switch# show running-config aclmgr all
!Command: show running-config aclmgr all
!Time: Wed May 25 08:03:46 2011
version 5.2(1)
ip access-list acl1
ip access-list cisco123-copp-acl-bgp
10 permit tcp any gt 1024 any eq bgp
20 permit tcp any eq bgp any gt 1024
ipv6 access-list cisco123-copp-acl-bgp6
10 permit tcp any gt 1024 any eq bgp
20 permit tcp any eq bgp any gt 1024
ip access-list cisco123-copp-acl-cts
10 permit tcp any any eq 64999
20 permit tcp any eq 64999 any
ip access-list cisco123-copp-acl-dhcp
10 permit udp any eq bootpc any
20 permit udp any neq bootps any eq bootps
ip access-list cisco123-copp-acl-dhcp-relay-response
10 permit udp any eq bootps any
20 permit udp any any eq bootpc
ip access-list cisco123-copp-acl-eigrp
Displays both the default (CoPP-configured) and
user-configured ACLs in the running configuration.
Displays the inactive policies in the running
configuration.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show running-config aclmgr
877