Show Cts Role-Based Access-List - Cisco Nexus 7000 Series Command Reference Manual

show cts role-based access-list

show cts role-based access-list
To display the global Cisco TrustSec security group access control list (SGACL) configuration, use the show
cts role-based access-list command.
show cts role-based access-list [ list-name ]
Syntax Description
list-name
Command Default
None
Command Modes
Any configuration mode
Command History
Release
4.2(1)
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to display the Cisco TrustSec SGACL configuration:
switch# show cts role-based access-list
rbacl:test-3
rbacl:test-1
rbacl:test-2
Related Commands
Command
feature cts
Cisco Nexus 7000 Series Security Command Reference
744
deny ip
deny ip
deny icmp
deny tcp src eq 1000 dest eq 2000
deny udp src range 1000 2000
permit icmp
permit igmp
permit tcp src lt 2000
permit udp dest gt 4000
(Optional) SGACL name.
Modification
Added list name argument.
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Show Commands