Ipv6 Neighbor Binding Logging - Cisco Nexus 7000 Series Command Reference Manual

ipv6 neighbor binding logging

ipv6 neighbor binding logging
To enable the logging of binding table main events, use the ipv6 neighbor binding logging command in
global configuration mode. To disable this function, use the no form of this command.
ipv6 neighbor binding logging
no ipv6 neighbor binding logging
Syntax Description
This command has no arguments or keywords.
Command Default
Binding table events are not logged.
Command Modes
Global configuration (config)
Command History
Release
8.0(1)
Usage Guidelines
The ipv6 neighbor binding logging command enables the logging of the following binding table events:
• An entry is inserted into the binding table.
• A binding table entry was updated.
• A binding table entry was deleted from the binding table.
• A binding table entry was not inserted into the binding table, possibly because of a collision with an
Examples The following example shows how to enable binding table event logging:
switch(config)# ipv6 neighbor binding logging
Related Commands
Command
ipv6 neighbor binding vlan
ipv6 neighbor tracking
ipv6 snooping logging packet drop
Cisco Nexus 7000 Series Security Command Reference
454
existing entry, or because the maximum number of entries has been reached.
Modification
This command was introduced.
Description
Adds a static entry to the binding table database.
Tracks entries in the binding table.
Configures IPv6 snooping security logging.
I Commands