Dot1X Re-Authentication (Exec) - Cisco Nexus 7000 Series Command Reference Manual

dot1x re-authentication (EXEC)

dot1x re-authentication (EXEC)
To manually reauthenticate 802.1X supplicants, use the dot1x re-authentication command.
dot1x reauthentication [ interface ethernet slot | port]
Syntax Description
interface ethernet slot/port
Command Default
None
Command Modes
EXEC
Command History
Release
4.0(1)
Usage Guidelines
You must use the feature dot1x command before you configure 802.1X.
This command does not require a license.
Examples
This example shows how to reauthenticate 802.1X supplicants manually:
switch# dot1x re-authentication
This example shows how to reauthenticate the 802.1X supplicant on an interface manually:
switch# dot1x re-authentication interface ethernet 2/1
Related Commands
Command
feature dot1x
show dot1x all
Cisco Nexus 7000 Series Security Command Reference
202
(Optional) Specifies the interface for manual
reauthentication.
Modification
This command was introduced.
Description
Enables the 802.1X feature.
Displays all 802.1X information.
D Commands