Show Ip Dhcp Relay - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ip dhcp relay

To display DHCP snooping relay status, including DHCP server address configuration details, use the show
ip dhcp relay command.
show ip dhcp relay
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(2)
7.2(0)D1(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display the DHCP relay status and configured DHCP server addresses:
switch# show ip dhcp relay
DHCP relay service is enabled
Insertion of option 82 is enabled
Insertion of VPN suboptions is enabled
Helper addresses are configured on the following interfaces:
Interface
-------------
Ethernet1/4
This example shows how to display the DHCP relay status and configured DHCP server addresses. In this
example, the helper address is configured on a bridge domain interface.
switch# show ip dhcp relay
DHCP relay service is enabled
Insertion of option 82 is enabled
Insertion of VPN suboptions is enabled
Global smart-relay is disabled
Relay Trusted Port is Globally disabled
Relay Trusted functionality is disabled
Smart-relay is enabled on the following interfaces:
-----------------------------------------------------
Subnet-broadcast is enabled on the following interfaces:
------------------------------------------------------
Helper addresses are configured on the following interfaces:
Interface
Modification
This command was introduced.
This command was modified. An example for a helper address configuration
on a bridge domain interface (BDI) was added.
Relay Address VRF Name
------------- --------
10.10.10.1 red
Relay Address VRF Name
Cisco Nexus 7000 Series Security Command Reference
show ip dhcp relay
793