Cts Role-Based Policy Priority-Static - Cisco Nexus 7000 Series Command Reference Manual

C Commands

cts role-based policy priority-static

To set a higher install priority for the SGACLs configured by using CLI, use the cts role-based policy
priority-static command. Use the no form of this command to revert, that is, set the install priority for the
SGACLs downloaded by ISE.
cts role-based policy priority-static
no cts role-based policy priority-static
Command Default
Install priority is set for the SGACLs configured by using CLI.
Command Modes
Global configuration
Command History
Release
8.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
Examples
This example shows how to set higher install priority for ISE configured SGACLs:
switch# configure terminal
switch(config)# no cts role-based policy priority-static
Related Commands
Command
feature cts
cts refresh role-based-policy
show cts role-based policy
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Refreshes the Cisco TrustSec security group access
control list (SGACL) policies.
Displays the Cisco TrustSec SGACL policies and
their details.
Cisco Nexus 7000 Series Security Command Reference
cts role-based policy priority-static
169