Capture Session - Cisco Nexus 7000 Series Command Reference Manual

capture session

capture session
To enable a capture session for the access control list (ACL), use the capture session command.
capture session session
Syntax Description
session
Command Default
None
Command Modes
ACL capture configuration mode (config-acl-capture)
Command History
Release
5.2(1)
Usage Guidelines
This command does not require a license.
Examples This example shows how to configure an ACL capture session configuration:
switch# configure terminal
switch(config)# ip access-list abc1234
switch(config-acl)# capture session 7
switch(config-acl)#
Related Commands
Command
ip access-list
monitor session session type acl-capture
Cisco Nexus 7000 Series Security Command Reference
64
Session ID. The range is from 1 to 48.
Modification
This command was introduced.
Description
Creates an access list.
Configures an ACL capture session.
C Commands