Cisco Nexus 7000 Series Command Reference Manual page 669

S Commands
This example shows how to revert to the default Cisco TrustSec SAP operation mode on an interface:
switch# configure terminal
switch(config)# interface ethernet 2/3
switch(config-if)# cts dot1x
switch(config-if-cts-dot1x)# no sap modelist gmac
switch(config-if-cts-dot1x)# exit
switch(config-if)# shutdown
switch(config-if)# no shutdown
Related Commands
Command
cts dot1x
feature cts
show cts interface
Description
Enters Cisco TrustSec 802.1X configuration mode
for an interface.
Enables the Cisco TrustSec feature.
Displays the Cisco TrustSec configuration for
interfaces.
Cisco Nexus 7000 Series Security Command Reference
sap modelist
643