Vlan Access-Map - Cisco Nexus 7000 Series Command Reference Manual

vlan access-map

vlan access-map
To create a new VLAN access-map entry or to configure an existing VLAN access-map entry, use the vlan
access-map command. To remove a VLAN access-map entry, use the no form of this command.
vlan access-map map-name [ sequence-number ]
no vlan access-map map-name [ sequence-number ]
Syntax Description
sequence-number
map-name
Command Default
None
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
Each VLAN access-map entry can include one action command and one or more match command.
Cisco Nexus 7000 Series Security Command Reference
984
(Optional) Sequence number of the VLAN
access-map entry that you are creating or editing.
A sequence number can be any integer between 1 and
4294967295.
By default, the first entry in a VLAN access map has
a sequence number of 10.
If you do not specify a sequence number, the device
adds the rule to the end of the VLAN access map and
assigns a sequence number that is 10 greater than the
sequence number of the preceding entry.
When you use the no form of the command, use the
sequence-number argument to specify an entry that
you want to remove. Omit the sequence-number
argument if you want to remove the entire VLAN
access map.
Name of the VLAN access map that you want to
create or configure. The map-name argument can be
up to 64 alphanumeric, case-sensitive characters.
Modification
This command was introduced.
V Commands