Cisco Nexus 7000 Series Command Reference Manual page 663

R Commands
Usage Guidelines
You can configure up to 256 rules for each role.
The rule number that you specify determines the order in which the rules are applied. Rules are applied in
descending order. For example, if a role has three rules, rule 3 is applied before rule 2, which is applied before
rule 1.
This command does not require a license.
Examples This example shows how to add rules to a user role:
switch# configure terminal
switch(config)# role MyRole
switch(config-role)# rule 1 deny command clear users
switch(config-role)# rule 1 permit read-write feature-group L3
This example shows how to remove rule from a user role:
switch# configure terminal
switch(config)# role MyRole
switch(config-role)# no rule 10
Related Commands
Command
role name
show role
Description
Creates or specifies a user role name and enters user
role configuration mode.
Displays the user roles.
Cisco Nexus 7000 Series Security Command Reference
rule
637