Cisco Nexus 7000 Series Command Reference Manual page 631

R Commands
auth-port port-number
authentication
retransmit count
test
idle-timetime
passwordpassword
usernamename
timeout seconds
Command Default
Accounting port: 1813
Authentication port: 1812
Accounting: enabled
Authentication: enabled
Retransmission count: 1
Idle-time: none
Server monitoring: disabled
Timeout: 5 seconds
Test username: test
Test password: test
Command Modes
Global configuration
(Optional) Configures the RADIUS server port for
authentication. The range is from 0 to 65535.
(Optional) Configures authentication.
(Optional) Configures the number of times that the
device tries to connect to a RADIUS server(s) before
reverting to local authentication. The range is from 1
to 5 times and the default is 1 time.
(Optional) Configures parameters to send test packets
to the RADIUS server.
Specifies the time interval (in minutes) for monitoring
the server. The range is from 1 to 1440 minutes.
Specifies a user password in the test packets. The
password is alphanumeric, case sensitive, and has a
maximum of 32 characters.
Specifies a username in the test packets. The name is
alphanumeric, not case sensitive, and has a maximum
of 32 characters.
Specifies the timeout (in seconds) between
retransmissions to the RADIUS server. The default
is 5 seconds and the range is from 1 to 60 seconds.
Cisco Nexus 7000 Series Security Command Reference
radius-server host
605