Cisco Nexus 7000 Series Command Reference Manual page 1013

V Commands
it is currently applied, use the VLAN-list argument to specify the VLANs where the access map should be
removed.
This command does not require a license.
Examples This example shows how to apply a VLAN access map named vlan-map-01 to VLANs 20 through 45:
switch# configure t
switch(config)# vlan filter vlan-map-01 20-45
This example show how to use the no form of the command to unapply the VLAN access map named
vlan-map-01 from VLANs 30 through 32, which leaves the access map applied to VLANs 20 through 29 and
33 through 45:
switch# show vlan filter
vlan map vlan-map-01:
switch(config)# no
vlan filter vlan-map-01 30-32
switch# show vlan filter
vlan map vlan-map-01:
Related Commands
Command
action
match
show vlan access-map
show vlan filter
vlan access-map
Configured on VLANs:
Configured on VLANs:
20-45
20-29,33-45
Description
Specifies an action for traffic filtering in a VLAN
access map.
Specifies an ACL for traffic filtering in a VLAN
access map.
Displays all VLAN access maps or a VLAN access
map.
Displays information about how a VLAN access map
is applied.
Configures a VLAN access map.
Cisco Nexus 7000 Series Security Command Reference
vlan filter
987