Show Running-Config Copp - Cisco Nexus 7000 Series Command Reference Manual

show running-config copp

show running-config copp
To display control plane policing configuration information in the running configuration, use the show
running-config copp command.
show running-config copp [all]
Syntax Description
all
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
You can use this command only in the default virtual device context (VDC).
This command does not require a license.
Examples This example shows how to display the configured control plane policing information in the running
configuration:
switch# show running-config copp
version 4.0(1)
class-map type control-plane match-any copp-system-class-critical
match access-group name copp-system-acl-arp
match access-group name copp-system-acl-msdp
class-map type control-plane match-any copp-system-class-important
match access-group name copp-system-acl-gre
match access-group name copp-system-acl-tacas
class-map type control-plane match-any copp-system-class-normal
match access-group name copp-system-acl-icmp
match redirect dhcp-snoop
match redirect arp-inspect
match exception ip option
match exception ip icmp redirect
match exception ip icmp unreachable
policy-map type control-plane copp-system-policy
class copp-system-class-critical
transmit violate drop
class copp-system-class-important
transmit violate drop
Cisco Nexus 7000 Series Security Command Reference
880
police cir 2000 kbps bc 1500 bytes pir 3000 kbps be 1500 bytes conform transmit exceed
police cir 1000 kbps bc 1500 bytes pir 1500 kbps be 1500 bytes conform transmit exceed
(Optional) Displays configured and default
information.
Modification
This command was introduced.
Show Commands