Crypto Ca Remote Ldap Server-Group - Cisco Nexus 7000 Series Command Reference Manual

C Commands

crypto ca remote ldap server-group

To configure the Lightweight Directory Access Protocol (LDAP) server group to be used while communicating
with LDAP, use the crypto ca remote ldap server-group command.
crypto ca remote ldap server-group group-name
Syntax Description
group-name
Command Default
None
Command Modes
Global configuration
Command History
Release
5.0(2)
Usage Guidelines
To use this command, you must configure a remote cert-store.
This command does not require a license.
Examples This example shows how to configure the LDAP server group to be used while communicating with LDAP:
switch(config)# crypto ca remote ldap server-group group1
Related Commands
Command
crypto ca lookup
crypto ca remote ldap crl-refresh-time
Server group name. You can enter up to 64
alphanumeric characters.
Modification
This command was introduced.
Description
Specifies the cert-store to be used for certificate
authentication.
Configures the refresh time to update the certificate
revocation list from the remote cert-store.
Cisco Nexus 7000 Series Security Command Reference
crypto ca remote ldap server-group
135