Aaa Authentication Login Invalid-Username-Log - Cisco Nexus 7000 Series Command Reference Manual

aaa authentication login invalid-username-log

aaa authentication login invalid-username-log
To include the username in authentication failed messages for all failure reasons, use the aaa authentication
login invalid-username-log command. To revert to the default, use the no form of this command. This applies
to both local and remote authentication.
aaa authentication login invalid-username-log
show aaa authentication login invalid-username-log
no aaa authentication login invalid-username-log
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
It is a Configuration Mode Command
Command History
Release
7.1
Usage Guidelines
The above command will cause the username to be included in authentication failed messages for all failure
reasons. This is irrespective of whether the username is valid or not since under some conditions the switch
cannot determine a username's validity. This applies to both local and remote authentication.
This command does not require a license.
Examples This example shows how to include the username in authentication failed messages for all failure reasons:
switch# configure terminal
switch(config)# aaa authentication login invalid-username-log
This example shows how to exclude the username in authentication failed messages for all failure reasons:
switch# configure terminal
switch(config)# no aaa authentication login invalid-username-log
Cisco Nexus 7000 Series Security Command Reference
32
Modification
This Command was introduced.
A Commands