Clear Cts Policy - Cisco Nexus 7000 Series Command Reference Manual

C Commands

clear cts policy

To clear the Cisco TrustSec security group access control list (SGACL) policies, use the clear cts policy
command.
clear cts policy {all| peer device-id| sgt sgt-value}
Syntax Description
all
peer device-id
sgt sgt-value
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
To use this command, you must enable the Cisco TrustSec feature using the feature cts command.
This command requires the Advanced Services license.
Examples This example shows how to clear all the Cisco TrustSec SGACL policies on the device:
switch# clear cts policy all
Related Commands
Command
feature cts
show cts role-based policy
Clears all the Cisco TrustSec SGACL policies on the
local device.
Clears the Cisco TrustSec SGACL policies for a peer
device on the local device.
Clears the Cisco TrustSec SGACL policies for a
security group tag (SGT) on the local device.
Modification
This command was introduced.
Description
Enables the Cisco TrustSec feature.
Displays Cisco TrustSec SGACL policy information.
Cisco Nexus 7000 Series Security Command Reference
clear cts policy
63