Show Ipv6 Snooping Counters - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ipv6 snooping counters

To display information about the packets counted by the interface counter, use the show ipv6 snooping
counterscommand.
show ipv6 snooping counters {interface type number| vlan vlan-id}
Syntax Description
interface type number
vlan vlan-id
Command Modes
Any command mode
Command History
Release
8.0(1)
Usage Guidelines
The show ipv6 snooping counters command displays packets handled by the switch that are being counted
in interface counters. The switch counts packets captured per interface and records whether the packet was
received, sent, or dropped. If a packet is dropped, the reason for the drop and the feature that caused the drop
are both also provided.
Examples The following examples shows information about packets counted on Fast Ethernet interface 4/12:
switch# show ipv6 snooping counters interface Fa4/12
Received messages on Fa4/12:
Protocol
ICMPv6
Bridged messages from Fa4/12:
Protocol
ICMPv6
Dropped messages on Fa4/12:
Feature/Message RS
RA guard
Dropped reasons on Fa4/12:
RA guard
The table below describes the significant fields shown in the display.
Modification
This command was introduced.
Protocol message
RS RA NS
0 4256 0
Protocol message
RS RA NS
0 4240 0
RA NS
0 16 0
16 RA drop - reason:RA/REDIR received on un-authorized port
Displays first-hop packets that match the specified
interface type and number.
Displays first-hop packets that match the specified
VLAN ID.
NA REDIR CPS
0 0 0
NA REDIR CPS
0 0 0
NA REDIR CPS
0 0 0
Cisco Nexus 7000 Series Security Command Reference
show ipv6 snooping counters
CPA
0
CPA
0
CPA
0
823