Ldap-Server Timeout - Cisco Nexus 7000 Series Command Reference Manual

L Commands

ldap-server timeout

To configure a global timeout interval that determines how long the Cisco NX-OS device waits for responses
from all Lightweight Directory Access Protocol (LDAP) servers before declaring a timeout failure, use the
ldap-server timeout command. To remove the global timeout configuration, use the no form of this command.
ldap-server timeout seconds
no ldap-server timeout seconds
Syntax Description
seconds
Command Default
5 seconds
Command Modes
Global configuration
Command History
Release
5.0(2)
Usage Guidelines
To use this command, you must enable LDAP.
This command does not require a license.
Examples This example shows how to configure the global timeout interval for LDAP servers:
switch# configure terminal
switch(config)# ldap-server timeout 10
Related Commands
Command
feature ldap
show ldap-server
Timeout interval for LDAP servers. The range is from
1 to 60 seconds.
Modification
This command was introduced.
Description
Enables LDAP.
Displays the LDAP server configuration.
Cisco Nexus 7000 Series Security Command Reference
ldap-server timeout
485