I Commands
ipv6 dhcp-ldra attach-policy vlan
To enable the Lightweight DHCPv6 Relay Agent (LDRA) feature on a VLAN, use the ipv6 dhcp-ldra
attach-policy vlan command.
ipv6 dhcp-ldra attach-policy vlan vlan-id {client-facing-trusted| client-facing-untrusted}
no ipv6 dhcp-ldra attach-policy vlan vlan-id {client-facing-trusted| client-facing-untrusted}
Syntax Description
client-facing-trusted
client-facing-untrusted
vlan-id
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
7.3(0)D1(1)
Usage Guidelines
To use this command, you must enable the LDRA feature by using the ipv6 dhcp-ldra command.
Examples
This example shows how to enable the LDRA feature on the specified interface:
switch(config)# ipv6 dhcp-ldra
switch(config)# ipv6 dhcp-ldra attach-policy vlan 1032
This example shows how to disable the LDRA feature on the specified interface:
switch(config)# no ipv6 dhcp-ldra attach-policy vlan 1032
Related Commands
Command
ipv6 dhcp-ldra
Specifies client-facing VLAN as trusted.
Specifies client-facing VLAN as untrusted.
Specifies the VLAN ID.
Modification
This command was introduced.
Description
Enables the LDRA feature.
Cisco Nexus 7000 Series Security Command Reference
ipv6 dhcp-ldra attach-policy vlan
445