Password Secure-Mode - Cisco Nexus 7000 Series Command Reference Manual

password secure-mode

password secure-mode
To enable secure mode for password changing, use the password secure-mode command. To disable the
secure mode for password changing, use the no form of this command.
password secure-mode
no password secure-mode
Syntax Description
This command has no arguments or keywords.
Command Default
Enabled
Command Modes
Global configuration
Command History
Release
6.1.4
Usage Guidelines
This command does not require a license.
Examples This example shows how to enable secure mode for changing password:
switch# configure terminal
switch(config)# password secure-mode
This example shows how to disable secure mode for changing password:
switch# configure terminal
switch(config)# no password secure-mode
Related Commands
Command
show password strength-check
Cisco Nexus 7000 Series Security Command Reference
528
Modification
This command was introduced.
Description
Enables password-strength checking.
P Commands