Cisco Nexus 7000 Series Command Reference Manual page 332

eou revalidate (EXEC)
Usage Guidelines
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
The Cisco NX-OS software supports an eou revalidate command in global configuration mode. To use
Note
an EXEC-level eou revalidate command in global configuration mode, include the required keywords.
Examples This example shows how to revalidate all the EAPoUDP sessions:
switch# eou revalidate all
This example shows how to revalidate all the EAPoUDP sessions:
switch# eou revalidate authentication static
This example shows how to revalidate all the EAPoUDP sessions:
switch# eou revalidate interface ethernet 1/1
This example shows how to revalidate all the EAPoUDP sessions:
switch# eou revalidate ip-address 10.10.1.1
This example shows how to revalidate all the EAPoUDP sessions:
switch# eou revalidate mac-address 0019.076c.dac4
This example shows how to revalidate all the EAPoUDP sessions:
switch# eou revalidate posturetoken healthy
Related Commands
Command
feature eou
show eou
Cisco Nexus 7000 Series Security Command Reference
306
Description
Enables EAPoUDP.
Displays EAPoUDP information.
E Commands