Cisco Nexus 7000 Series Command Reference Manual page 642

rate-limit cpu direction
Examples
This example shows how to configure rate limits globally on the device for packets that reach the supervisor
module:
switch# configure terminal
switch(config)# rate-limit cpu direction both pps 10000 action log
switch(config)#
This example shows how to remove the global rate limit configuration:
switch# configure terminal
switch(config)# no rate-limit cpu direction both pps 10000 action log
switch(config)#
Related Commands
Command
show system internal pktmgr internal control
sw-rate-limit
Cisco Nexus 7000 Series Security Command Reference
616
Description
Displays the inband and outband global rate limit
configuration for packets that reach the supervisor
module.
R Commands