Show Vlan Filter - Cisco Nexus 7000 Series Command Reference Manual

Hide thumbs Also See for Nexus 7000 Series:
Table of Contents

Advertisement

Show Commands

show vlan filter

To display information about instances of the vlan filter command, including the VLAN access-map and the
VLAN IDs affected by the command, use the show vlan filter command.
show vlan filter [access-map map-name| vlan vlan-ID]
Syntax Description
access-map map-name
vlanvlan-ID
Command Default
The device shows all instances of VLAN access maps applied to a VLAN, unless you use the access-map
keyword and specify an access map, or you use the vlan keyword and specify a VLAN ID.
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to display all VLAN access map information on a device that has only one VLAN
access map applied (austin-vlan-map) to VLANs 20 through 35 and 42 through 80:
switch# show vlan filter
vlan map austin-vlan-map:
Related Commands
Command
action
match
Configured on VLANs:
(Optional) Limits the output to VLANs that the
specified access map is applied to.
(Optional) Limits the output to access maps that are
applied to the specified VLAN only. Valid VLAN
IDs are from 1 to 4096.
Modification
This command was introduced.
20-35,42-80
Description
Specifies an action for traffic filtering in a VLAN
access map.
Specifies an ACL for traffic filtering in a VLAN
access map.
Cisco Nexus 7000 Series Security Command Reference
show vlan filter
935

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents