Cisco Nexus 7000 Series Command Reference Manual page 384

hardware rate-limiter
mtu
multicast
ttl
receive
portgroup-multiplier multiplier
Command Default
See the Syntax Description for the default rate limits.
Default rate limits for the F1 Series modules:
RL-1: 4500 packets per second
RL-2: 1000 packets per second
RL-3: 1000 packets per second
RL-4: 100 packets per second
RL-5: 1500 packets per second
Command Modes
Global configuration
Command History
Release
6.2(12)
6.2(2)
5.1(1)
5.0(2)
4.1(2)
Cisco Nexus 7000 Series Security Command Reference
358
Specifies Layer-3 maximum transmission unit (MTU)
failure redirected packets. The default rate is 500
packets per second.
Specifies Layer-3 multicast packets per second.
Specifies Layer-3 failed time-to-live redirected
packets. The default rate is 500 packets per second.
Specifies packets redirected to the supervisor module.
The default rate is 30000 packets per second.
Specifies the multiplier value. The range is from 0.10
to 3.00. The default value is 1.00.
Note
Modification
Added the portgroup-multiplier keyword and the multiplier parameter.
Added the glean-fast keyword.
Added the f1, rl-1, rl-2, rl-3, rl-4, and rl-5 keywords.
Also, added the following keywords:
module, disable, and port.
Added the l2pt keyword.
This command was introduced to replace the platform rate-limit command.
This applies to F2, F2e, and F3
cards.
H Commands