Show Startup-Config Ldap - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show startup-config ldap

To display Lightweight Directory Access Protocol (LDAP) configuration information in the startup
configuration, use the show startup-config ldap command.
show startup-config ldap
Syntax Description
This command has no arguments or keywords.
Command Default
None
Command Modes
Any command mode
Command History
Release
5.0(2)
Usage Guidelines
You must use the feature ldap command before you can display LDAP information.
This command does not require a license.
Examples This example shows how to display the LDAP information in the startup configuration:
switch# show startup-config ldap
!Command: show startup-config ldap
!Time: Wed Feb 17 13:02:31 2010
!Startup config saved at: Wed Feb 17 10:32:23 2010
version 5.0(2)
feature ldap
aaa group server ldap LDAPgroup1
no ldap-search-map
aaa group server ldap LdapServer1
no ldap-search-map
Related Commands
Command
show ldap-server
Modification
This command was introduced.
Description
Displays LDAP information.
Cisco Nexus 7000 Series Security Command Reference
show startup-config ldap
905