Feature Dot1X - Cisco Nexus 7000 Series Command Reference Manual

F Commands

feature dot1x

To enable the 802.1X feature, use the feature dot1x command. To revert to the default, use the no form of
this command.
feature dot1x
no feature dot1x
Syntax Description
This command has no arguments or keywords.
Command Default
Disabled
Command Modes
Global configuration
Command History
Release
4.0(1)
Usage Guidelines
You must use the feature dot1x command before you configure 802.1X.
Note If you disable the 802.1X feature, all 802.1X configuration is lost. If you want to disable 802.1X
authentication, use the no dot1x system-auth-control command.
This command does not require a license.
Examples
This example shows how to enable 802.1X:
switch# configure terminal
switch(config)# feature dot1x
This example shows how to disable 802.1X:
switch# configure terminal
switch(config)# no feature dot1x
Related Commands
Command
show dot1x
Modification
This command was introduced.
Description
Displays 802.1X status information.
Cisco Nexus 7000 Series Security Command Reference
feature dot1x
321