Eou Ratelimit - Cisco Nexus 7000 Series Command Reference Manual

E Commands

eou ratelimit

To configure the number of simultaneous posture validation sessions for Extensible Authentication Protocol
over User Datagram Protocol (EAPoUDP), use the eou ratelimit command. To revert to the default, use the
no form of this command.
eou ratelimit sessions
no eou ratelimit
Syntax Description
sessions
Command Default
Global configuration: 20
Interface configuration: Global configuration setting
Command Modes
Global configuration Interface configuration
Command History
Release
4.0(1)
Usage Guidelines
Setting the EAPoUDP rate limit to zero (0) allows no simultaneous posture validation sessions.
The EAPoUDP rate limit for an interface overrides the globally EAPoUDP rate limit setting.
You must use the feature eou command before you configure EAPoUDP.
This command does not require a license.
Examples
This example shows how to change the global maximum number of simultaneous EAPoUDP posture-validation
sessions:
switch# config t
switch(config)# eou ratelimit 30
This example shows how to revert to the default global maximum number of simultaneous EAPoUDP
posture-validation sessions:
switch# config t
switch(config)# no eou ratelimit
Maximum number of simultaneous EAPoUDP posture
validation sessions. The range is from 0 to 200.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
eou ratelimit
303