Cisco Nexus 7000 Series Command Reference Manual page 578

permit (IPv4)
• net-redirect—Network redirect
• net-tos-redirect—Net redirect for ToS
• net-tos-unreachable—Network unreachable for ToS
• net-unreachable—Net unreachable
• network-unknown—Network unknown
• no-room-for-option—Parameter required but no room
• option-missing—Parameter required but not present
• packet-too-big—Fragmentation needed and DF set
• parameter-problem—All parameter problems
• port-unreachable—Port unreachable
• precedence-unreachable—Precedence cutoff
• protocol-unreachable—Protocol unreachable
• reassembly-timeout—Reassembly timeout
• redirect—All redirects
• router-advertisement—Router discovery advertisements
• router-solicitation—Router discovery solicitations
• source-quench—Source quenches
• source-route-failed—Source route failed
• time-exceeded—All time exceeded messages
• timestamp-reply—Timestamp replies
• timestamp-request—Timestamp requests
• traceroute—Traceroute
• ttl-exceeded—TTL exceeded
• unreachable—All unreachables
TCP Port Names
When you specify the protocol argument as tcp, the port argument can be a TCP port number, which is an
integer from 0 to 65535. It can also be one of the following keywords:
bgp—Border Gateway Protocol (179)
chargen—Character generator (19)
cmd—Remote commands (rcmd, 514)
daytime—Daytime (13)
discard—Discard (9)
domain—Domain Name Service (53)
Cisco Nexus 7000 Series Security Command Reference
552
P Commands