Show Ip Dhcp Snooping Binding - Cisco Nexus 7000 Series Command Reference Manual

Show Commands

show ip dhcp snooping binding

To display IP-to-MAC address bindings for all interfaces or a specific interface, use the show ip dhcp snooping
binding command. It includes static IP source entries. Static entries appear with the term "static" in the Type
column.
show ip dhcp snooping binding [IP-address][MAC-address] [interface ethernet slot/port] [vlanvlan-id]
show ip dhcp snooping binding [dynamic]
show ip dhcp snooping binding [static]
Syntax Description
IP-address
MAC-address
interface ethernetslot/port /
vlan vlan-id
dynamic
static
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
(Optional) IPv4 address that the bindings shown must
include. Valid entries are in dotted-decimal format.
(Optional) MAC address that the bindings shown
must include. Valid entries are in dotted-hexadecimal
format.
(Optional) Specifies the Ethernet interface that the
bindings shown must be associated with.
(Optional) Specifies a VLAN ID that the bindings
shown must be associated with. Valid VLAN IDs are
from 1 to 4096.
(Optional) Limits the output to all dynamic IP-MAC
address bindings.
(Optional) Limits the output to all static IP-MAC
address bindings.
Modification
This command was introduced.
Cisco Nexus 7000 Series Security Command Reference
show ip dhcp snooping binding
801