Eou Initialize - Cisco Nexus 7000 Series Command Reference Manual

eou initialize

eou initialize
To initialize Extensible Authentication Protocol over User Datagram Protocol (EAPoUDP) sessions, use the
eou initialize command.
eou initialize {all| authentication {clientless| eap| static}| interface ethernet slot / port| ip-address
ipv4-address| mac-address mac-address| posturetoken name}
Syntax Description
all
authentication
clientless
eap
static
interface ethernet slot/port
ip-address ipv4-address
mac-address mac-address
posturetoken name
Command Default
None
Command Modes
Any command mode
Command History
Release
4.0(1)
Cisco Nexus 7000 Series Security Command Reference
296
Initializes all EAPoUDP sessions.
Initializes EAPoUDP sessions for a specific
authentication types.
Specifies sessions authenticated using clientless
posture validation.
Specifies sessions authenticated using EAPoUDP.
Specifies sessions authenticated using statically
configured exception lists.
Initializes the EAPoUDP sessions for a specific
interface.
Initializes the EAPoUDP sessions for a specific IPv4
address.
Initializes the EAPoUDP sessions for a specific MAC
address.
Initializes the EAPoUDP sessions for a specific
posture token.
Modification
This command was introduced.
E Commands