Description (Identity Policy) - Cisco Nexus 7000 Series Command Reference Manual

description (identity policy)

description (identity policy)
To configure a description for an identity policy, use the description command. To revert to the default, use
the no form of this command.
description text
no description
Syntax Description
"text"
Command Default
None
Command Modes
Identity policy configuration
Command History
Release
4.0(1)
Usage Guidelines
This command does not require a license.
Examples
This example shows how to configure the description for an identity policy:
switch# configure terminal
switch(config)# identity policy AdminPolicy
switch(config-id-policy)# description "Administrator identity policy"
This example shows how to remove the description from an identity policy:
switch# configure terminal
switch(config)# identity policy AdminPolicy
switch(config-id-policy)# no description
Related Commands
Command
identity policy
show identity policy
Cisco Nexus 7000 Series Security Command Reference
264
Text string that describes the identity policy. The
string is alphanumeric. The maximum length is 100
characters.
Modification
This command was introduced.
Description
Creates or specifies an identity policy and enters
identity policy configuration mode.
Displays identity policy information.
D Commands