Cisco Nexus 7000 Series Command Reference Manual page 783

Show Commands
Set up
Conn status
Connection inst# : 1
TCP conn fd
TCP conn password: not set (using default SXP password)
Duration since last state change: 0:00:05:49 (dd:hr:mm:sec)
Total num of SXP Connections = 2
Related Commands
Command
cts sxp connection peer
cts sxp default password
cts sxp default source-ip
cts sxp enable
cts sxp log
cts sxp reconciliation
cts sxp retry
: Peer
: On
: 2
Description
Enters the Cisco TrustSec SXP peer IP address and
specifies if a password is used for the peer connection
Configures the Cisco TrustSec SXP default password.
Configures the Cisco TrustSec SXP source IPv4
address.
Enables Cisco TrustSec SXP on a device.
Enables logging for IP-to-SGT binding changes.
Changes the Cisco TrustSec SXP reconciliation
period.
Changes the Cisco TrustSec SXP retry period timer.
Cisco Nexus 7000 Series Security Command Reference
show cts sxp
757