Set Precedence (Policy Map Class) - Cisco Nexus 7000 Series Command Reference Manual

S Commands

set precedence (policy map class)

To set the precedence value for IPv4 and IPv6 packets in a control plane policy map, use the set precedence
command. To revert to the default, use the no form of this command.
set precedence [tunnel] {prec-value| critical| flash| flash-override| immediate| internet| network| priority|
routine}
no set precedence [tunnel] {prec-value| critical| flash| flash-override| immediate| internet| network|
priority| routine}
Syntax Description
tunnel
prec-value
critical
flash
flash-override
immediate
internet
network
priority
routine
Command Default
0 or routine
Command Modes
Policy map class configuration
set precedence (policy map class)
(Optional) Sets the precedence in a tunnel
encapsulation.
Numerical value for DSCP precedence in the control
plane policy map. The range is from 0 to 7.
Specifies critical precedence equal to precedence
value 5.
Specifies flash precedence equal to precedence value
3.
Specifies flash override precedence equal to
precedence value 4.
Specifies immediate precedence equal to precedence
value 2.
Specifies internet precedence equal to precedence
value 6.
Specifies network precedence equal to precedence
value 7.
Specifies priority precedence equal to precedence
value 1.
Specifies routine precedence equal to precedence
value 0.
Cisco Nexus 7000 Series Security Command Reference
659